E m b e d d e d S o l u t i o n s P g 1 9 o f 2 0
Specifications
Logic Interface:
IP Module Logic Interface
CompactFLASH:
One CompactFLASH compatible socket provided. External transition module
can be used to add a second module.
Software Interface:
Control Registers, ID PROM, Vector Register, Status Ports
Initialization:
Hardware Reset forces all registers to 0.
Access Modes:
Word I/O Space (see memory map)
Word in ID Space
Vectored interrupt
Access Time:
Access time depends on CompactFLASH Module. back-to-back cycles in 500ns
(8Mhz.) or 125 nS (32 Mhz.) for internal operations. Approximately 1 uS for
CompactFLASH accesses. Write operations are posted and return for pipelined
operation. Read accesses are data delayed.
Interrupt:
Masked or polled operation. Master interrupt enable and status. INTRQ0 only.
DMA:
No Logic Interface DMA Support implemented at this time.
Onboard Options:
All Options are Software Programmable
Interface Options:
50 pin flat cable
50 screw terminal block interface [HDRterm50]
User cable
none required.
Dimensions:
Standard Single IP Module. 1.8 x 3.9 x 0.344 (max.) inches
Construction:
FR4 Multi-Layer Printed Circuit, Through Hole and Surface Mount Components.
Programmable parts are socketed.
Temperature Coefficient:
0.89 W/oC for uniform heat across IP
Power:
Max.
TBD
mA @ 5