Dynamic Displays, Inc. User Manual Doc: 0048070
1625 Westgate Road 17C3 A/D Series Rev 2
Eau Claire, WI 54073 Glee 17C3 Page #5 of 26
UNPACKING THE MONITOR
Your LCD monitor package will consist of the following components listed on the section below. Open shipping
container and lay all the components on a flat clean surface. If any component is missing, please contact Dynamic
Displays as soon as possible.
NOTES:
•
We recommend you keep the packing box for transportation.
•
In case of transporting and packing the unit in the packing box, carefully place it, in the packing box keeping
its panel from touching any objects
PRODUCT SAFETY PRECAUTIONS
Read all these instructions and save this manual for later use. Follow all warnings and instructions on the product.
These safety instructions must be followed to ensure your safety and prevent property damage.
•
Do not cover or block the ventilation holes in the enclosure.
•
Do not insert sharp objects or spill liquid into the monitor through the cabinet slots. This may cause
accidental fire, electric shock or failure.
•
Unplug the unit when not in use for an extended period of time.
•
Do not attempt to service this product yourself, since opening or removing the cover may expose you to
potential electric shock. Only a qualified technician should service this product.
PACKAGE CONTENTS
Before operating this monitor, please make sure that all items listed are present in your package:
•
LCD Monitor
•
AC/DC Adapter
•
AC Power Cord
•
VGA Cable
•
User’s Manual
CONNECTING THE MONITOR
No tools are required to install the LCD monitor. Simply follow the instructions outlined in the next few steps.
Connectors for the signal and power are located on the back panel.
•
Connect Signal Cable (VGA): Attached the VGA cable connector with the ferrite bead closest to it to the
graphics card adaptor on your computer system and attached the other end to the monitor. Be cautious in
inserting the cable properly into both connectors. If the cable does not fit it may be facing the wrong
direction. Turn the cable over and try to match the shape of the connector with that of the graphics adapter.
•
Connect Power Adapter and Cable: Connect the round shape plug end of the AC/DC adapter to the DC
Power input connector of the LCD monitor. Connect the female end of the power cable to the AC power
input receptacle on the AC/DC adapter. Then plug the male end of the power cable into an AC outlet.
