SAFE OPERATION GUIDE
：
1.Do not make lifts beyond rated load capacity of the dynamometer, shackle.
2
.
Do not perform overhead weighing. Stay clear when Dynamometer is in
operation.
3. Do not perform weighing under strong wind condition which may cause
incorrect reading.
4. Do not perform weighing under environment of temperature rapid changes in
which may cause incorrect reading.
5. Do not attempt to open this Dynamometer, no user serviceable parts inside.
6. Do not remove wire rope stopper from hook. For safety reasons, always apply
it.
7. Remove all loads from shackle or hook when not in used.
8. Before weighing, check and make sure that all hanging /load- receiving
elements / devices are in good condition.
9. Check hook, shackle, safety pins, and latches periodically. Contact your dealer
for parts replacement in case defect, deform or wearing is found.
10. Always lift loads vertically.
USER MANUAL 2
