background image

19

IMPORTANT NOTE

•  The battery must be upright while charging.
•  The charger is not a toy.
•  Do not short-circuit the battery.
•  You do not need to remove the battery from your ride-on toy to recharge it.
•  Before charging the battery, examine the battery case for cracks and other 

damage which may cause sulfuric acid (electrolyte) to leak during the charging 
process. If damage is detected, do not charge the battery or use it in your ride-
on toy. Battery acid is very corrosive and can cause severe damage to surfaces 
it contacts.

•  Use only an original charger (AC 120V 60Hz) with an output of DC 24V (1A) to 

charge your ride-on toy battery.

• 

NOTE TO ADULTS:

 Regularly examine the charger for damage to the cord, plug, 

housing or other parts that may result in the risk of fire, electric shock or injury.

•  If your battery is old and will not accept a charge, do not leave it in the ride-on 

toy. Always remove a dead battery from the ride-on toy.

•  After the first charge, recharge the battery for at least 12 hours after each use. 

Never charge the battery longer than 30 hours. Charge the battery after each 
use, regardless of how long the ride-on toy was used.

•  Do not allow the battery to run down completely before charging.
•  Charge the battery before storing the ride-on toy.
•  Charge the battery at least once per month, even if the ride-on toy has not been 

used.

NOTE:

•  This product has CHARGING PROTECTION: when charging, all the functions will 

be cut off.

•  Initial charge – At least 18 hours, and never charge the battery longer than 30 

hours.

•  When the ride-on toy begins to run slowly, recharge the battery. 
•  After each use or once a month at minimum if not used, recharge the battery for 

at least 12 hours, but never more than 30 hours at most.

 WARNING:

 Use the charger in dry locations only.

Содержание 24V PRINCESS CARRIAGE



































Отзывы: