8
TOOLS REQUIRED:
ASSEMBLY
Your new ride-on toy requires adult assembly. Because your new ride-on toy is
heavy and large, we strongly suggest using two people to finish assembly. Set
aside around 90 minutes for assembly. Identify all parts before assembly and save
all packaging material until assembly is completed to ensure that no parts are
discarded.
17 mm Socket Wrench
(included)
WARNING:
Children can be harmed by small parts, sharp edges and sharp points
in the ride-on toy's unassembled state, or by electrical items. In the unassembled state, this
package contains small parts. Adult assembly is required; children should not handle parts,
or help in assembly of the ride-on toy.
Phillips Screwdriver
(not included)
• Find the other set of two pieces labeled
“Front”, remove the M6x40 machine screw
and nut on them, and insert the front
flourishes into the front of carriage body.
Follow the previous instructions to tighten
the front undercarriage flourishes.
1. UNDERCARRIAGE FLOURISH
ASSEMBLY
• Remove all parts inside the carriage body
(put them aside for later use).
• Find the four pieces of the undercarriage
flourish in the accessories pack.
• Find one set of two pieces labeled “Rear”,
remove the M6x40 machine screw and nut
on them, and insert the rear flourishes into
the back of the carriage body.
• Insert the M6x40 machine screw and M6 nut
and tighten them with a Phillips screwdriver.
NOTE:
There are left and right side undercarriage
flourishes; the side with screws should face inside.
M6x40
Machine
Screw
M6x40
Machine
Screw
Rear
Front
M6 Nut
M6 Nut
Needle-Nose Pliers
(not included)
D
