Dynacord DPC 8015, Руководство пользователя

Страница: 11 / 56

Paging Console
Owner‘s Manual 11
Selective Call
The user can launch calls or announcements into freely selectable areas or groups.
Pressing a single or several selection buttons defines areas or groups where a call is launched into –
corresponding green LEDs will light. By pressing the key of an already pre-selected line once again
deactivates that line and the corresponding green LED goes out. If the yellow LED of a selection button
lights, the corresponding area or group is busy.
After making a selection, pressing the TALK button ignites the call. Prior hereto, the TALK LED allows
checking whether all lines and the paging station input are actually free. If single lines or the terminal input
are busy with lower priority transmissions, the TALK LED will blink slowly. Whilst making an announcement
is possible, this will interrupt any other transmitted event. If single lines or the terminal input are busy with
p
(PROGRAM)
Pressing the PROGRAM button selects the program assign
mode. The selection keys are used in this mode to assign a
program (background music) to the desired areas or groups.
The PROGRAM LED lights while being in the program assign
mode. In this case the green selection LEDs indicate the
areas / groups the program is being transmitted into.
Keeping the ON button pressed and simultaneously pressing
the PROGRAM key selects the setup mode. Now you can
alter preferences or make other changes as described in the
chapter
Paging Console Configuration in Setup mode on
page 14. The setup mode is automatically canceled when for
approximately 15 seconds no entry or change has been
made.
In setup mode this
button is used to
select the next
parameter/menu
item.
DEL (ALL/
CLEAR) The ALL button allows the selection of all programmed areas
at once for transmitting messages, gong or alarm signals,
vocal messages, or to assign programs. On time pressing
selects all areas. The corresponding green selection LEDs
and the ALL LED are lit. Subsequent pressing cancels
(clears) the selection. Deletes the cur-
rently selected
parameter.
TALK This button activates a message for pre-selected areas or
groups. The TALK LED blinks when one or several areas are
busy or when an event with higher priority setting interrupts
the output message (see page 8 for details). The optional
toggle mode of the key is configured via IRIS-Net. Confirms the
parameter change
or selects the high-
lighted menu item.
Selection buttons The 15 selection buttons with corresponding green / yellow
LEDs are used to pre-select areas or groups for the reproduc-
tion of messages, gong or alarm signals, vocal messages, or
to assign programs (pressed once = ON, subsequently
pressed = OFF). The LEDs indicate the momentary selection
status (also refer to page 8). It is also possible to assign spe-
cial functions or no function at all (no function assigned) to the
selection buttons. Assigning functions is performed during the
configuration procedure via IRIS-Net. Enter the corre-
sponding number
of the key.
Operation mode Setup mode