Page
7
of
14
6.0 TESTING FOR GROUND CONTINUITY
U
WARNING:
U
Test the electrical continuity of the vacuum cleaner before
each use. This will ensure that any static electricity that is
produced while vacuuming will be discharged to ground.
U
WARNING:
U
Use only original replacement parts from the manufacturer or
from one of its authorized distributors.
a. An ohm-meter is required to perform the following electrical continuity test. A
reading of 10 ohms or less is satisfactory to ensure proper grounding and static
dissipation.
b. Disconnect the vacuum cleaner from the electrical outlet.
c. Make sure that all the latches on the vacuum cleaner are fastened and that the
detachable recovery tank is properly installed on the vacuum cleaner.
d. Disconnect the suction hose from the vacuum cleaner.
e. Using the ohm-meter test for the electrical continuity of the vacuum cleaner from
the ground pin on the electrical plug to the suction intake of the vacuum cleaner.
A reading of 10 ohms or less is satisfactory to ensure proper grounding and static
dissipation.
Содержание DETACHABLE TANK SERIES
Страница 42: ...Page 16 of 28 c Detach the recovery tank...
