Page
5
of
23
2.1. APPLICATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN PRESENCE OF
FLAMMABLE GASES, VAPORS OR LIQUIDS
The 61496 ATEX-10A IT-40L CFE HEPA IMMERSION SEPARATOR "WET (WATER) MIX" is
designed for use in Class I, Division 1 - Groups A, B, C and D, T6 which representative gases
are Acetylene and Hydrogen, Hazardous Locations, where ignitable concentrations of
flammable gases, vapors or liquids can exist all of the time or some of the time under normal
operating conditions.
WARNING:
The maximum surface temperature of the vacuum cleaner (85
o
C/185
o
F)
must always be lower than the ignition temperature of the gas present in
the hazardous area.
WARNING:
The 61496 ATEX-10A IT-40L CFE HEPA IMMERSION SEPARATOR "WET
(WATER) MIX" can be used in areas where flammable liquids and
solvents are present but cannot be used to recover flammable liquids
and solvents.
WARNING:
It is the user’s responsibility to conduct a full Process Hazard Analysis
in regard to the compatibility of the dusts recovered and the flammable
gases, vapors or liquids and other combustible dusts present in the
hazardous location.
2.2. APPLICATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN PRESENCE OF
COMBUSTIBLE DUST
The 61496 ATEX-10A IT-40L CFE HEPA IMMERSION SEPARATOR "WET (WATER) MIX" is
designed for use in Class II, Division 1, Groups E, F, G Hazardous Locations, which
representative dusts are metals, coal and grain, where ignitable concentrations of combustible
dust can exist all of the time or some of the time under normal operating conditions.
The 61496 ATEX-10A IT-40L CFE HEPA IMMERSION SEPARATOR "WET (WATER) MIX"
can be used to recover a maximum of 1 gallon (3.8 liters) of combustible dusts directly
in the recovery tank or 0.8 gallon (3 liters) of combustible dust in the conductive recovery
bag within 3.25 gallons / 12.3 liters of water:
WARNING:
It is the user’s responsibility to determine if water is appropriate and safe
to precipitate and neutralize the specific dust being recovered.
WARNING:
THE IMMERSION SYSTEM WILL EXTINGUISH A HOT PARTICLE SUCH
AS GRINDING SPARKS. NONETHELESS, COLLECTED HOT EMBERS
OR IGNITED DUSTS CAN IGNITE COMBUSTIBLE DUST IN THE SUCTION
HOSE. MAKE SURE TO CLEAN THE SUCTION HOSE ON A REGULAR
BASIS TO REMOVE ALL REMAINING COLLECTED COMBUSTIBLE
DUST.
Содержание 61496
Страница 12: ...Page 12 of 23 9 0 FILTRATION SYSTEM...
