dynabook SATELLITE PRO C40-K, Руководство пользователя

Страница: 35 / 47

4.14 Panel Assembly
Removing the Panel Assembly
Remove the panel Assembly according to the following procedures and Figure 4.14-1 and
Figure 4.14-2 and Figure 4.14-3
1. Pull up the tape from LCD cover
□
,1 as shown in Figure 4.14-1
2. Carefully lift up and rotate the panel from the LCD assembly as the arrow
□
,2 indicates
in Figure 4.14-1
3. Place the panel on a protective surface, such as a foam pad as shown in Figure 4.14-2
4. Peel the conductive tape
□
,3 on EDP cable connector so that the connector are visible as
shown in Figure 4.14-3
5. Pull the lock bar outward and disconnect the EDP cable from the touch glass panel
□
,4 as
shown in Figure 4.14-2
6. Disconnect the EDP cable FFC from Camera FPC (5->6->7) and Gently pry up the
Camera FPC
□
,8 as shown in Figure 4.14-3
7. Peel away the EDP cable
□
,9 on LCD cover assembly in Figure 4.14-3