Installing
the
Finger
Module
Install the finger print module according to the following procedures:
1.
Seat the finger print in the correct position on the logic upper assembly
□
,5.
2.
Place the finger print bracket on the logic upper assembly
□
,4.
3.
Tighten one M2×2 screw to secure the finger print bracket to the logic upper assembly
□
,3.
Connect the finger print FFC to the finger print
□
,1
□
,2.
Содержание SATELLITE PRO C40-K
Страница 12: ...Figure 4 4 1 Removing the Thermal Cu Plate Figure 4 4 2 Removing the Thermal Cu Plate...
Страница 14: ...Figure 4 4 3 Fan Cable and WLAN Cable Routing...
Страница 31: ...Figure 4 12 2 Removing the LCD Assembly...
Страница 36: ...Figure 4 14 1 Removing the Securing tape Figure 4 14 2 Disconnecting the Cable from Panel Assembly...
