dynabook SATELLITE PRO C40-K, Руководство пользователя

Страница: 29 / 47

Figure 4.11-2 Location of Electronic tape & Conductive tape
Installing the Touch Pad Module
Install the touch pad module according to the following procedures:
1. Seat the touch pad in the correct position on the logic upper assembly.
□
,5
2. Seat the TP support bracket in the correct position on the logic upper assembly
□
,4 and
tighten two M2×2 screws to secure the tp support bracket to the logic upper assembly.
□
,3
3. Connect the touch pad FPC to the touch pad.
□
,2
□
,1
4. Adhere the conductive tape over the touch pad and logic upper assembly as shown in Figure 4.11-2
□
,6