When replacing the USB board with a new one, stick two pieces of
GUM
CUSHION
on the USB board in place.
Figure 4-35 Removing the USB board
4.25.2
Installing the USB board
To install the USB board (FMERLT*), follow the step below and refer to
Figure 4-35
.
1. Set the
USB board (FMERLT*)
to the Cover Assembly in place
and secure it with the screws.
2. Rotate the left display hinge to original position and secure it with
two screws.
4.26 Keyboard/Cover Assembly
The keyboard is assembled to the Cover Assembly by hot melt glue. When either
the keyboard or the Cover Assembly needs to be replaced with a new one, please
replace them all with a new set of keyboard and Cover Assembly which are already
assembled.
4.26.1
Removing the Keyboard/Cover Assembly
To remove the Keyboard/Cover Assembly, follow the step below and refer to
Figure
4-36
.
Содержание SATELLITE PRO A50-J Series
Страница 41: ...Figure 4 44 Removing the display hinges...
