dynabook SATELLITE PRO A50-J Series, Руководство пользователя

Страница: 13 / 48

After installing the memory module, make sure that the memory module is secured
with the left and right latches.
Take care not to press on the top or bottom of a SSD. Pressure may cause the data
loss or damage to the device.
Figure 4-10 Seating the memory module
4.14 SSD
4.14.2
Removing the SSD
To remove the SSD, follow the steps below and refer to Figure 4-11 .
1. Remove the the following screw and disconnect the SSD from
the connector CN1900 on the SYSTEM board.