Dymo LabelWriter SE300, Руководство пользователя

Страница: 82 / 132

4-78
GS u Set Characters per Line in Portrait
DESCRIPTION
Creates an internal memory buffer to store portrait text and bar
codes. The size of the buffer is determined by
n , the number of
characters per line. The n parameter is converted internally to
millimeters so new line lengths can be automatically calculated in
the event a font change takes place. The conversion to millimeters
is done by multiplying the value of
n by the width of whatever
font is currently set when the GS u command is sent.
This command may be used in conjunction with the GS T
command to determine where, if at all, text wraps to the next line.
This command is similar to the GS t command.
SEE ALSO
GS t
GS T
EXPRESSION
ASCII GS u n
Decimal 29 117 n
Hex 1D 75 n
PARAMETERS
n = the desired number of characters per line in portrait mode
EXAMPLE
For an example of this command’s usage, see Appendix A,
page 93, Example 42.
For an example of this command using the Caret feature see page
102, Example 42.