Dymo LabelWriter SE300, Руководство пользователя

Страница: 8 / 132

1-4
Figure 1-3. Loading labels onto the label spool.
7. Make sure that the power cord is connected. Turn on the
printer. The green power light will flash and you will hear the
printer’s motor turning as it looks for labels to feed.
8. Place the spool inside the top cover of the LabelWriter, then
thread the lead label of the roll into the feed slot on the inside
of the printer base (See Figure 1-4).
Figure 1-4. Hold the labels in one hand. Use the other hand to
guide the labels into the label feed slot.
9. Push the end of the label into the feed slot until the motor
grabs it and advances the labels through the printer and out
the exit slot, stopping automatically at the end of the first
label.