BlueWave® QX4® User Guide
17
Set Up
In the constant mode menu, the user can
see the current power and time
configuration for each one of the LED
Heads. To update any LED Head, navigate
to the LED Head using the up and down
buttons. The selected option will be
highlighted in green. Press the right
button to edit. Any LED Head that is not
connected will appear grayed out. The
user can still select and program any
grayed-out rows, but the unit will not run
the program for the disconnected LED
Head.
Another screen will show the power and
time (Figure 12). To change the power,
press the run button (Figure 13). The
number will start blinking. Use the up
and down buttons to modify the value.
Press the run button again to set. The
power can be set from a value of 10-
100%, at 1% increments. To edit the time,
navigate to it using the Down button.
Press the run button (Figure 13) to edit.
Use the up and down buttons to change
the value, then press the run button
again to set. The maximum time setting is
999 seconds. To turn off an LED Head,
set the power or time setting to 0.
Pressing and holding the up or down
buttons will increase/decrease the value
at a faster pace.
When editing is finished, press the left
button to go back to the constant model
menu.
Figure 11. Constant Mode Menu
Figure 12. Power & Time Editing
Screen
Figure 13. Run Button
