Dyaco CT 900 LED, Руководство по обслуживанию

Страница: 86 / 125

86
8. Error Messages / Troubleshooting
Troubleshooting
Item Troubleshooting
Display board
1. Press incline UP key – check UP RELAY action on driver board.
2. Press incline DOWN key - check DOWN RELAY action on driver board.
3. If no action, inspect cables and connections.
Console cable
1. Inspect whether the console cable is properly connected.
2. Replace the cable with a new one if needed.
Driver board
1. Inspect UP/DOWN RELAY action.
2. Press incline UP or DOWN key again, to have incline motor return to its position.
6. If ERR still appears, re-calibrate the incline set.
Incline motor
1. Check if the incline motor is stuck.
2. Inspect whether the incline gears are cracked.
3. Check if the incline motor has a broken circuit.
4. Re-calibrate the incline set.
Factory and acceleration settings
1.2 Enter the factory settings; press Start and Speed Fast keys while console is in power up process. Press Enter.
1.2.1 UNITS: ENGLISH
1.2.1.1 The default setting is English. Press up/down arrows to change to Metric. Press Enter.
1.2.2 ADJUST MIN SPEED 0.5
1.2.2.1 Default value is 0.5 mph and can be adjusted from 0.3 to 0.7mph.
1.2.2.2 The speed number to be shown in the speed window.
1.2.3 ADJUST MAX SPEED 12.0
1.2.3.1
Default value is 12.0 mph and can be adjusted down to 10.0 mph.
1.2.3.2 The speed number to be shown in the speed window
1.2.4
ADJUST ACCEL 0:02
1.2.4.1 The default is 0:02 seconds and will be shown in the Time window.
1.2.4.2
The time can be adjusted down to 0:01 and up to 0:04 seconds
1.2.5
ADJUST DECEL 0:02
1.2.5.1
The default is 0:02 seconds and will be shown in the Time window.
1.2.5.2
The time can be adjusted down to 0:01 and up to 0:04 seconds