PMC-700-X00 User’s Manual
DY 4 Systems Inc.
iv
809789 Revision 2 December 2000
Apply Power.......................................................................................................................................3-10
Display the GPM Prompt ...................................................................................................................3-10
Boot the Operating System ................................................................................................................3-11
Install the PMC-700 Software............................................................................................................3-11
4. Hardware Installation on a DY 4 Pentium™ Basecard ............................................ 4-1
Installation Procedure Summary - Pentium Basecard ................................................................................4-3
Installation Procedure - DY 4 Pentium Basecard .......................................................................................4-4
Before You Begin... .............................................................................................................................4-4
Unpack and Configure the Cards .........................................................................................................4-4
Install the PMC-700 on the Basecard...................................................................................................4-4
Choosing a Slot Location .....................................................................................................................4-4
Insert the Basecard in the Chassis ........................................................................................................4-5
Connect a Keyboard and Mouse ..........................................................................................................4-5
Connect a Monitor................................................................................................................................4-6
Power Up the Chassis...........................................................................................................................4-8
Set Up the BIOS...................................................................................................................................4-8
Connect a Floppy Drive, Hard Drive, and a CD Drive ........................................................................4-8
Install the Operating System and Software Drivers .............................................................................4-8
Install the 3DLabs Software Drivers....................................................................................................4-8
A. PN1, PN2, and PN4 Interface Pin-outs ......................................................................A-1
PMC Connector Pin Assignments ............................................................................................................. A-3
PMC Connector PN1........................................................................................................................... A-3
PMC Connector PN2........................................................................................................................... A-4
PMC Connector PN4........................................................................................................................... A-5
Index ................................................................................................................................... I-1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
