- 7 -
Locate the Aluminum Mounting Plate and the two 3/4” U-Bolt Cast Aluminum Saddle Clamps with
stainless steel mounting hardware. Loosely assemble the two Cast Aluminum Saddle Clamps to the
mounting plate as shown in
Figure 2
.
Figure 2 - Aluminum Saddle Clamps
Install the solid Fiberglass Rod through the two aluminum Saddle Clamps as
shown in
Figure 3
.
Note the solid Fiberglass Rod bottom will be flush with the bottom of
the Mounting Plate.
Tighten the aluminum Saddle Clamps evenly taking care not to crush or
damage the solid Fiberglass Rod.
Tighten the hex nuts evenly until the split washers are flush.
Figure 3
