DX Engineering DXE-60VE-1P, Руководство пользователя

Страница: 3 / 23

- 2 -
Introduction
The DX Engineering DXE-60VE-1P is a fast taper 43 feet high vertical antenna system. As
supplied, the vertical antenna is designed to operate on 60 meters. Manufactured with 6063
corrosion-resistant aluminum tubing and stainless steel hardware, this antenna is very durable and
attractive.
The
DXE-60VE-1P vertical antenna system includes the antenna elements, stainless steel clamps,
mounting plate assembly, patented Tilt Base , and stainless steel hardware and the DXE-VMN-1
Vertical Matching Network.
•
Full 60 meter band coverage with SWR under 1.5:1
•
43 feet overall height
•
Includes the patented DXE Tilt Base (US Patent No. 7,342,875)
•
Fast Taper from rugged base to sleek top for low wind resistance
•
Power Handling up to 5 kW - built to last
•
Includes the DXE-VMN-1 Vertical Antenna Matching Network to optimize 60 meters
•
Perfect for Four Square or Phased Array systems
WARNING!
INSTALLATION OF ANY ANTENNA NEAR POWER LINES IS DANGEROUS
Warning :
Do not locate the antenna near overhead power lines or other electric light or power
circuits, or where it can come into contact with such circuits. When installing the antenna, take
extreme care not to come into contact with such circuits, because they may cause serious injury or
death.
Overhead Power Line Safety
Before you begin working, check carefully for overhead power lines in the area you will be
working. Don't assume that wires are telephone or cable lines: check with your electric utility for
advice. Although overhead power lines may appear to be insulated, often these coverings are
intended only to protect metal wires from weather conditions and may not protect you from electric
shock
Keep your distance! Remember the 10-foot rule: When carrying and using ladders and other long
tools, keep them at least 10 feet away from all overhead lines - including any lines from the power
pole to your home.