DX Engineering DXE-60VE-1P, Руководство пользователя

Страница: 21 / 23

- 20 -
Optional Accessory Items
DXE-RADP-3 - patented Radial Plate, Stainless Steel with 20 Sets of SS Radial Attachment Hardware
The DX Engineering patented Radial Plate is meant for those of you that have or are building a quarter wave vertical
antenna and who want an easy, neat and effective way to connect those essential radial wires and the coax to your
vertical antenna for the lowest takeoff angle and strongest signals. DX Engineering Radial Plate is laser cut from
tough stainless steel so that it has smooth edges, won’t corrode and will always look good. You will be proud of how
good your installation looks. This plate will work perfectly with most commercially available vertical antennas such
as the Hustler
®
BTV series (4-BTV thru the 6-BTV), the SteppIR™ (BiggIR or SmallIR) or one of your own
construction.
DXE-SSVC-2P - Stainless Steel V-Clamp for steel pipe, 2 inch V-bolt
This V-Clamp is made in one size that fits Steel tubing or pipe from 1" to 2'' OD as used in antenna construction. The supplied V-bolt
is long enough to attach tubing to thick plates and is made with anti-corrosive properties. The special Stainless Steel saddle has
serrated teeth will clamp to the pipe securely by biting into the surface. For this reason, it is not recommended for softer
aluminum tubing or pipe. Ideal for fastening a radial plate and antenna mounting to a steel pipe.
•
Used to clamp 1 to 2'' (OD) steel tubing or pipe
•
Designed for attachments that don't require resistance to torque
•
V-bolt and saddle made from high-strength 18-8 stainless steel
DXE-112-KIT - SO-239, Chassis Mount Socket, PTFE Insulation -
Chassis mount with PTFE insulation for high power situations. Packaged with the correct stainless bolts, flat washers, star
washers and Nyloc locking nuts.
•
PTFE insulation - Stainless steel hardware - Nyloc nuts
JTL-12555 Jet-Lube
™
SS-30 Pure Copper Anti-Seize
Jet-Lube
™
SS-30 Pure Copper Anti-Seize is the top choice of engineers and technicians in government, industry and leading Amateur
Radio contest stations, for protecting mechanical assemblies of aluminum tubing, general hardware and copper grounding
systems. On bonded metal surfaces Jet-Lube
™
SS-30 assures electrical and RF conductivity while preventing oxidation
and corrosion. Surpassing the capabilities of other aluminum anti-oxidants, the wide temperature range of Jet-Lube
™
SS-
30 prevents long-term drying and caking, and allows easy disassembly and effortless cleaning of parts. An
environmentally preferred thread lubricant and conductive termination compound, Jet-Lube
™
SS-30 helps keep your
equipment in serviceable condition. It contains a high concentration of copper flakes, a requirement for heavy loads or
compression; controlled frictional characteristics allow the surfaces of nuts and bolts to be tightened to their design torque
specifications. This anti-seize product assures full hydraulic efficiency by allowing the metal surfaces to slide over each
other without damaging metal-to-metal contact. Jet-Lube
™
SS-30 is also designed to work as a similar and dissimilar
component between two metal surfaces to prevent seizing and galvanic action. The SS-30 compound formula improves
conductivity and ground continuity - and will not melt in high temperatures. Features include:
* Meets MIL-PRF-907E spec
* K-factor: 0.13
* Service rating: -65 degrees F (-54 degrees C) to 1800 degrees F (820 degrees C)
* SS-30 Resistivity (ohm-CM x 108) 5
* This product is limited to domestic UPS Ground shipping only
DXE-RADW - 500K or 1000K Radial Wire Kits and Components
To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial wire kits
use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is commonly available at the big box
stores. It will last much longer in contact with soil than bare wire.
The DXE-RADW- 500K or 1000K kit provide everything you will need to build the perfect radial system!
•
500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation, 20/40 lugs, 100/200 radial wire anchor pins-
Eliminating the need to bury your radials!, Build up to 20/40 radials, 25 feet long
DXE-RADW-500K Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Staples
DXE-RADW-1000K Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Staples
DXE-STPL - Radial Wire Anchor Pins, 100/pack - No need to bury your radials!
DX Engineering Radial Wire Anchor Pins are perfect for fastening radials below the grass line to eliminate the risk of
damaging your radials during lawn maintenance. 100 count - 6'' Pins, 11-Gauge
DXE-STPL-100P Radial Wire Anchor Pins, 100/pack
DXE-STPL-300P Radial Wire Anchor Pins, 300/pack