Dwyer Instruments SAH SMART Air Hood Series Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 20

Dwyer Instruments SAH SMART Air Hood Series Скачать руководство пользователя страница 11

11

Pressing the “Open Log” button will display the following screen.

This screen displays all the sensors raw data and display data. The raw data is the

data created using the default units. The display data is the data after converting the

raw data into the selected engineering units. Additional options to interact with the log

data are at the bottom of the list of sensors.

The

VIEW COMMENTS

button will open a text area showing any comments, along

with a button that allows for the comments to be edited.

The

VIEW CONFIGURATION DATA

button will switch to a screen that displays the

hood information. This provides the hood’s version information, name, type, serial

number, and all the sensor’s information.

The

VIEW RAW DATA

button will open a new screen that is horizontally scrollable.

The

VIEW LOG CHART

button will open a chart of the logged points.

Touch to select and

unselect rows

The chart area can be zoomed in and out

by using two fingers. Double press will

return chart area to default zoom.

«
...
9
10
11
12
13
...
»

Содержание SAH SMART Air Hood Series





















Отзывы:

Нет отзывов