10
Installation Steps:
1. Install adapter ball valve (included) to the
cold water supply.
Use some Teflon or plumbers sealing tape to
prevent leaks. Use three included threaded
adapters to make different connection con-
figurations (see chart for details).
2. Create ½” hole for the filtered water faucet and install it.
Tip: If you have a soap dispenser or a water
sprayer in an existing hole you may remove it
and use its hole for the filtered water
faucet.
3. Install drain saddle.
t
The square foam gasket with a circle cut out must be applied to the inside of the drain sad-
dle. Remove sticky tape backing and stick to the drain saddle as shown.
1
2
3
4
5
6
7
8
9
10
11
1. Faucet
2. Chrome washer
3. Black rubber washer
4. Countertop or
sink deck
5. Black washer
6. Lock washer
7. Lock nut
8. Insert
9. Sleeve
10. Compression nut
11. Tubing
UNEF 9/16”-24
G3/8”
G1/2”
G1/2”
Adapter
Adapter
UNEF 9/16”-24
UNEF 9/16”-24
G3/8”
G1/2”
1
Adapter
1
Adapter
2
3
