9
IMPORTANT: Cut tubing at 90° to ensure a
watertight seal:
Units Placement Guide:
Remember this unit must be serviced at regular intervals. Therefore it should be reasonably
accessible (for changing filters or membrane, etc.).
To connect the tubing to a fitting:
1. Remove the lock if present (not present in self-locking fittings).
2. Push. Insert the tube firmly until full stop.
3. Pull the collet back slightly.
4. Replace the lock (if present).
To disconnect the tubing:
1. Remove the lock if present (not present in self-locking fittings).
2. Push the collet
and hold.
3. Pull the tubing out.
4. Replace the lock (if present).
No skewed cut!
1
4
3
2
1
4
2
3
