79
Network Setup -
Setup Case A, B
Configure your IP Camera’s TCP/IP properties:
1
Network Type: STATIC (even though you have
Dynamic IP from your ISP, use STATIC on the IP
camera).
2
Internet Address: A private IP address such as
192.168.0.200 (example)
3
Subnet Mask: 255.255.255.0 (example)
4
Default Gateway: 192.168.0.1 (example)
5
Preferred DNS Server: Use the 1st DNS Server from
‘Assigned IP Address from My ISP’.
6
DDNS Server: Use the DDNS server.
7
Web Port: 8888
Case A:
Dynamic IP + Personal Router [Most SOHO]
Case B:
Static(Fixed) IP + Personal Router [Efficient]
i
You need to assign an IP address to the IP Camera just
as you do with PC.
i
The IP address you assign must be unique to your
network and match your network as well.
For information on how to choose a unique IP and
match your network, read the FAQ.
i
The IP address you assign must be a private IP.
For information on how to choose a private IP please,
read the FAQ.
i
You must use the same subnet mask as the one you
noted under ‘Current TCP/IP Settings’.
i
If you did not receive any IP addresses from your ISP,
contact the ISP and acquire the IP address of their
DNS
server.
i
Do not use the default port 80 as this number must be
changed.
i
Select a number between 1025 ~ 60000.
i
This is the same site you will register later to
accommodate dynamic IP from your ISP.
i
This IP address must be the IP address of your router.
(private or LAN side)
i
Use the same Default Gateway you noted under
‘Current TCP/IP Settings’.
Camera
Personal Router
W/Integrated
Switch
Cable/xDSL Modem
(ISP Provided)
Phone Line
or CATV
PC
Internet
Camera
Personal Router
W/Integrated
Switch
Gateway or Router
at ISP
Public Line
PC
Internet