11
Installation -
Cabling
1. Network Connection
See page 11 for connection options.
2. Power
Please check the correct rated power.
3. Sensor/alarm input (DI)
The sensor/alarm input device's cable should
connect to + and - of the Terminal Block.
Alarm out/relay out (DO)
Connects to the alarm lights, siren or lamps and
the sensor types are normal open and
normal close.
4. Audio in
Connect the ‘audio in’ port of the camera to the
microphone directly or 'line out’ port of the
amplifier connected with a microphone.
If the microphone is connected directly, the
microphone with the embedded amplifier such
as condenser mic. needs to be used.
Audio out
Connect the ‘audio out’ port of the camera to the
‘line in’ port of the speaker.
If the speaker without the amplifier is connected
to the audio out port, it doesn’t work properly.
Therefore, the speaker with the amplifier or the
separate amplifier is needed.
5. SD card slot
See page 13.
Model
Power requirements
Power
consumption
DWC-MVC8WiATW
DWC-MPVC8WiATW
DC 12V, PoE IEEE
(802.3af class 3).
(Adapter not included)
DC12V: max 9.3W
PoE: max 11.6W
DWC-MVC8Wi28TW
DWC-MPVC8Wi28TW
DC12V: 8W
Po:E 9.6W
1
2
3
4
5
+
-
+
-
+
-
IN COM OUT
DC12V
DI
DO
AUDIO
2 3
4
