background image

59

Setup - Security Setup

IEEE 802.1X Configuration 

1

2
3

4
5
6

7
8

9

The feature is needed when connecting the camera to the network protected by the IEEE 802.1X. 

1

 

IEEE 802.1x -

 Enable or disable the IEEE 802.1x feature.

2

 Protocol

•  MD5: It provides one-way password-based network authentication of the client.
•  PEAP: It is similar to TTLS in that it does not require a certificate on the client side.
•  TTLS/MD5: It does not require a certificate on the client side.
•  TLS: It relies on client-side and server-side certificates to perform authentication.

3

 

EAPOL Version -

 Select the EAPOL Version.

4

 

ID - 

Type the ID to identify the client in the IEEE 802.1X authentication server.

5

 

Password -

 Type the Password to identify the client in the IEEE 802.1X authentication server.

6

 

Verify -

 Verify Password.

7

 

CA Certificate -

 Select the CA certificate required for TLS, TTLS, and PEAP authentication.

8

 

Certificate -

 Select the client certificate required for TLS authentication

9

  Click ‘Apply’ to save all settings.

Содержание DWC-MPVC8Wi28TW


























































































Отзывы: