background image

 

 

3. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties 

 

 

 

 

4. Select Use the following IP address (Use the following DNS server addresses will be selected automatically) 

5. Enter IP address and Subnet mask of the camera network. (do not enter anything for the Default gateway, Preferred DNS server and Alternate 

DNS server. 

 

 

NOTE 

It must be the same network as the cameras and must not be the same network as the local network.

 

Contact your network administrator for more information.

 

 

3. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties

6

 

 

3. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties 

 

 

 

 

4. Select Use the following IP address (Use the following DNS server addresses will be selected automatically) 

5. Enter IP address and Subnet mask of the camera network. (do not enter anything for the Default gateway, Preferred DNS server and Alternate 

DNS server. 

 

 

NOTE 

It must be the same network as the cameras and must not be the same network as the local network.

 

Contact your network administrator for more information.

 

 

 

 

 

 

3. Click X on upper left corner of the Time and Date window when done.

 

 

 

* Closing the window will automatically save the changes made.

 

 

STEP 3: 

Configure Network

 

 

Please have the following information ready before starting the network configuration.

 

 

 

Camera Network

 

Local Network (LAN)

 

IP Address

 

 

 

Subnet Mask / 

Netmask

 

 

 

Default Gateway / 

Gateway

 

Not Applicable

 

 

DNS Servers

 

Not Applicable

 

 

* Camera Network and Local Network cannot be on the same network.

 

 

 

 

Windows 

1. Double click Network Connections on the Desktop 

 

2. Right click on the Ethernet with cable connected and click Properties. 

NOTE 

If you are not sure what information to enter, contact your Network Administrator or Internet Service Provider 

for the information.

 

NOTE 

The Blackjack Cube’s network settings are set to DHCP as default.

 

STEP 3:

 

Configure Network

 

Please have the following information ready before starting the network configuration.

 

1. Double click Network Connections on the Desktop

 

2. Right click on the Ethernet with cable connected and click Properties.

 

Windows

 

* Camera Network and Local Network cannot be on the same network.

Camera Network

Local Network (LAN)

IP Address

Subnet Mask / Netmask

Default Gateway / Gateway

Not Applicable

DNS Servers

Not Applicable

NOTE

 

The Blackjack P-RACK’s network settings are set to DHCP as default.

NOTE

 

If you are not sure what information to enter, contact your Network Administrator or Internet Service 

Provider for the information.

Содержание Blackjack P-RACK





















Отзывы: