trk100/trk100d/trk200 Installation Manual
26
Problem
Possible Solution
Relay outputs are not
working
Check the unit settings to confirm that the relay output is
enabled. Refer to the
HTML Edition Units User’s Guide
for
details.
Check that a proper rule for activating a relay output has
been defined in the unit or activate it manually. Refer to the
HTML Edition Units User’s Guide
for details.
Check the relay output wires are connected securely.
Check that the relay output wires are paired in the terminal
block according to requirements and that one wire is
connected to the common.
Check that the NO or NC matches the system NORMALLY
OPEN or NORMALLY CLOSED configuration.
