Appendix
23
4.
Select a folder where to store the clip. Recording starts when the folder is selected.
5.
Walk through various locations across the vertical axis of the camera’s field of view in
order to place ground and height markers and guidelines in the clip.
6.
Press
Stop Recording
.
7.
Proceed to the tab for
Step 1: Ground & Height
.
Note:
For detailed instructions how to set markers and guidelines, follow instructions in
the
HTML Edition Units User’s Guide
.
8.
Click
Browse
to load the clip from the folder where it is saved.
9.
Use the
Play
,
Pause
,
Fast Forward
, and
Rewind
buttons on the
Solo Setup keypad to explore the clip. The status of the view is displayed on the bottom
left side of the screen.
10.
Exit Clip mode and return to
Live
mode by pressing the round
Play
button
on the
control panel located to the left of the monitor.
The caption under the monitor changes from
Clip
to
Live
.
11.
Repeat steps 3-9 above for each preset.
12.
Proceed to the tabs for Steps 2-4 of the Depth Setup to complete the setup and apply
settings.
