DVS TH102MS, Руководство пользователя, Страница: 8 / 36

7
DVD
SOURCE NAME
Audio Mute Function
Remote Control
Press to turn the Mute function ON and OFF.
Adjusting the Volume
Volume can be controlled from the headphone or your
own radio volume function.
1.
Turn on “ POWER ” on the headphone.
2.
Adjust the volume level by turning clockwise for
louder and counter-clockwise for lower on the
headphone.
‧
Refer to “Wireless Headphone” on Page 19~20.
Switching the Source
Front Control Keys
1.
Press “ SRC ” to cycle through the different sources.
Remote Control
1.
Press to cycle through the different sources.
‧
OSD (On Screen Display) will be turned off
automatically, when not operating more than 10
seconds.
‧
To connect the device to AV2 and AV3, please refer to
“Connections” on Page 26~27 .
‧ When the source is changed, the device will not
remember the scene where playback stopped.
‧
The device mode of the remote control is
automatically shifted to the assigned device, when
AV2 or AV3 is pressed.
‧ When you proceed the above step with front control
keys or remote control, the device source name on
OSD can be automatically shifted.
Turning Power ON/ OFF
The power state of the monitor will not be
memorized when Ignition/ACC is turned off. When
Ignition/ACC is turned back on, the monitor returns
to OFF.
Front Control Keys
1.
Press to turn ON.
2.
To turn off the power, press and hold again.
‧
Mute function.
Remote Control
1.
Press to turn ON.
2.
To turn off the power, press again.
Loading Discs / Unloading Discs
Turn on the power before loading and Unloading
Discs.
‧ Be sure to switch to DVD soure, before loading and
Unloading Discs..
Loading Discs
Insert the disc with the label side facing you.
Once the disc is partially inserted, it is drawn in
automatically. Playback starts
‧
If the ignition key is on ACC or ON, a disc cannot be
inserted when the power is OFF.
‧
If wrong disc, upside-down disc or dirty disc have
been inserted. ”NO DISC” is displayed.
Unloading Discs
While the power is ON, press to active the
MUTE
SOURCE
MUTE
Ba sic Operations
Press to eject the disc.
Be sure to remove the disc.
‧
If the ignition key is set to ACC or ON, a disc cannot
be removed when the power is OFF.
‧ During ACC OFF or while the disc is being loaded
(“READ” is displayed,) the disc will not be ejected
even if you press “ EJECT”.
DVD AV2 AV3
Seat Back Monitor
DVD AV2 AV3