DVS TH102MS, Руководство пользователя, Страница: 32 / 36

Seat Back Monitor
31
Image stops sometimes.
Disc is scratched.
- Replace with an non-scratched disc.
Picture is unclear or noisy.
Disc is being fast-forwarded or fast-reversed.
- The picture may be unclear, but this is normal.
Vehicle’s battery power is weak.
- Check the battery power and wiring. (The unit may
malfunction if the battery power is under 11 volts
with a load applied.)
Monitor’s fluorescent tube is worn out.
- Replace the monitor fluorescent tube.
Image stops sometimes.
Disc is scratched.
- Replace with a non-scratched disc.
Picture color is poor.
Brightness/Color/Tint/Contrast/Sharpness controls
are not set to the proper positions.
- Check each control.
The remote control does not work.
IR Received range is not enough.
- The remote control can be used within 2 meters.
Something interfere the IR transmitter.
- Please remove any possible objects.
Battery is exhausted.
- Replace the remote control battery.
Picture was very dark when starting the machine.
The temperature is too low.
- Wait a while (about 1 hour) for the warm up. After that,
the monitor will return to the normal condition.
Spots or dotted lines-stripes appear.
The LCD panel is manufactured using an extremely
high precision manufacturing technology.
- Its effective pixel ratio is over 99.99%. This means
that 0.01% of the pixels could be either always ON or
OFF.
Caused by neon signs, high-voltage power lines, CB
transmitter, other vehicle’s ignition plugs, etc.
- Change the location of your vehicle.
CAUTION
Due to continuous product improvement,
specifications and design are subject to change
without notice.
Warranty
CAUTION :
‧
‧
‧
Please make sure to read the user manual
carefully.
Please make sure to ask for the authentication
seal from the retailing shop on the warranty card
for certification and keep properly in order to
guaranteeing your rights.
Please make sure the units have serial number
before you send it back for repairing. If the units
didn’t have serial number or miss it, we will
unable to offer warranty for the units.
Warranty period:
ONE (1) YEAR from the date of original retail purchase.
Within the warranty period:
‧
‧
‧
Please comply with instruction of warranty card and
inquire your retailing shop about maintenance.
If the unit breaks down under normal usage, we will
repair the units free of charge. Furthermore, we will
be responsible for the two-way freightage fees.
If the unit breaks down because external force, such
as, man-made damage, hit, splash and so on, we will
charge the component fees and technologic fees
from customers. Furthermore, the customers should
responsible for the two-way freightage fees.
Exceed the warranty period:
‧
‧
‧
‧
If the product breaks down, please inquire your
retailing shop.
If the unit breaks down because external force or not
external force, we will charge the component fees
and technologic fees from customers. Furthermore,
the customers should be responsible for the two-way
freightage fees.
In order to maintain the function of the product, we
will charge the maintenance cost in accordance with
the state of customer's products.
The warranty period of the mending parts is 2 years.
The mending parts mean the essential parts for
keeping product operation.
About the repairing fees :
>>Technologic fees :
We will charge the repairing fees in accordance with the
state of customer's products after repairing.
The repairing fees will include technical staff fees,
technologic educational fees, test equipment fees of
device and general administration fees and so on.
>>Components fees :
The customers will be responsible for the components
fees and material fees of the defective product.
>>Freightage fees:
If the product breaks down because external force,
such as man-made damage, hit, splash and so on,
the customers should responsible for all freightage fees.
Other :
When sending the product to repair, please pack the
product perfectly, so as to prevent damage again on
the way of transport. Thanks.
Information