DVS Pronto4K, Руководство по оборудованию

Страница: 51 / 74

5-11
Maintenance
2
1
3
I
4
A
5
Figure 5-5: Removal of a power supply unit

Take the handle of the respective unit and press the unit’s latch
towards the handle to unlock it.

Then pull the unit at its handle out of the power supply.

Change the power supply unit against a new and operable one.

Slide the new unit into the power supply until it clicks into place.

Reinstall the security bar of the power supply again.

Connect the power source (power cord) to the newly installed
power supply unit.

After that check the LED indicating the status of the power supply
unit: If it is lit up in green, the unit is working properly.
With this the power supply unit has been replaced successfully.
Do not reach inside the system when removing a power
supply unit or when the unit is out of the system.
Only use original manufacturer spare parts. Other spare
parts might damage your system.
When completely inserted please observe that the latch is
truly in place and locking the unit.
screw
security bar
handle
latch