DVS Pronto2K, Руководство по оборудованию

Страница: 66 / 74

A-12
Pronto2K/ProntoHD Hardware Guide
A.6 Internal Wiring from Video Board to Outputs
The video board installed inside the video system is an important
piece of equipment. In case any of the internal wiring becomes loose,
you have to reconnect the video board to the outputs again.
The MCX connectors on the video board are numbered in ascending
order starting from the slot panel.
The cables belonging to the respective MCX connectors carry a cor-
responding numbering. To restore the internal wiring simply connect
the cables to their respective MCX connector on the board.
Figure A-1: Internal wiring
The video system works with voltages that can be haz-
ardous to your health. Never work on the system or ac-
cess its interior with the power cable(s) being plugged
in. Make sure the power supply is disconnected before
opening the casing.
Computer hardware contains components that are sensitive
to electrostatic discharge. If you touch them without precau-
tionary measures, they can be destroyed. Use a wrist strap
connected to ground when accessing electronic parts and
take care of grounding the video system. Avoid touching the
internal components of the video system.
The MCX connectors on the board are not labeled with the
numbering but with the signal names instead.
DVI Out
MCX connectors
Cables
1 2 3 4 5 6 7 8 9 10 11
2 6
3
7