User and maintenance manual
EN
TSC - TDC
5
8702040 – 14/01/2019 – R.7
www.dvp.it
Electrical hazard
Electrical equipment in the side channel turbine includes live parts which, upon contact, can cause serious damage
to persons and property. Any kind of repair work on the electrical system should only be done by specialised
personnel and only after insulating the turbine from the mains power supply.
Fire hazard
Use of the side channel turbine for any unforeseen uses or prohibited by this manual as well as a lack of proper
maintenance can cause malfunction with a risk of overheating and fire.
In case of fire, do not use water to extinguish the flames, but use a dry extinguisher or CO2 or other means
compatible with the presence of electrical equipment.
Hazard generated by the projection of parts or part of them
Arrange the installation of the side channel turbine in order to avoid those in charge of works being directly hit by
parts or bits of parts flying through the fan cover casing due to the cooling fan breaking.
2.3
PICTOGRAMS
Pictograms with warning and safety symbols for operators have been attached to the side channel turbine. Read
carefully and take note of the symbols and their messages before using the turbine.
ELECTRICAL HAZARD
You are near electrical connections (protected) but where accidental
contact can cause electric shock and death.
HOT SURFACE HAZARD
You are close to surfaces with temperatures exceeding 70°C which may
lead to 2
nd
degree burns.
HAZARD ARISING FROM MATERIALS BEING SUCKED INTO THE
TURBINE
You are close to vacuum connections where it is possible to intake
material into the turbine that can cause it to break and/or harm personnel.
D.V.P. Vacuum Technology s.p.a. declines any liability for damage to persons or property resulting from failure to
comply with instructions indicated in pictograms or their improper preservation.