DVDO Quick
6
27
A.04
out of the S/PDIF output on Quick
6
. So when you press the ARC button on Quick
6
remote control, the S/PDIF output will switch back and forth between the audio from
the selected input on Quick
6
to the audio from the main display.
Depending on the types of sources you have, one input may need to be active on
Quick
6
for ARC to pass audio properly and for the menu system to be visible.
Be sure that your TV supports ARC and that the connection from Quick
6
to the TV is
from the MAIN HDMI output on Quick
6
to a TV input that supports ARC (normally
labeled ARC). Not all inputs on a TV support ARC.
InstaPrevue
windows slow to
update,
PiP windows slow to
update,
Quick
6
slow to
switch
Depending on your sources, try using InstaPrevue windows in the left or right position
for best efficiency
Upon initial power up and InstaPrevue/PiP first use after power up, Quick
6
goes
through a discovery process to determine the capabilities and encryption settings of
each source, display, and AVR. Allow all windows to populate one time then resume
normal use.
Trouble entering
friendly names for
Inputs
The on-screen-keyboard is provided to make naming your inputs simple.
At the bottom of the keyboard, special characters provide keyboard control:
a: Go to lowercase letters and extra symbols
clr: Clear entire entry – normally use this first before entering new characters
del: delete currently highlighted character
spc: space
ok: save the entry and return
ins: insert a character
