DVDO Quick
6
25
A.04
mode
enables full surround sound even through the S/PDIF channel on Quick
6
.
1. Note that if bitstream is chosen on a source and the AVR is then
switched off, even though Quick
6
will unmute the audio stream to the
main display, the main display may not be capable of decoding a
bitstream audio channel and no audio will be heard. Either change the
source audio mode back to PCM/LPCM or turn on the AVR and select
the appropriate input on the AVR.
Quick
6
is not auto-
switching properly
Check the auto-switch settings in the Quick
6
menu. Manual disables autoswitch.
InstaPrevue
windows are missing
Only active inputs are displayed in the InstaPrevue screen. Any sources that are
powered down or in standby will not appear. If HDMI 6 power is used or an input
uses a non-standard power save mode, a grey window may appear for that input.
Firmware will not
update from the
USB flash drive
•
Be sure both firmware files .OSD and .BIN are in the root directory of the USB
flash drive and there are no other firmware files there.
•
Be sure both files are for the same firmware version (same number)
•
Be sure all capital letters are used in the filenames including the extension –
format will be Q6FWxxxx.BIN and Q6FWxxxx.OSD where xxxx is a 4 digit
number common to both filenames
•
When writing the files to the USB flash drive, choose Eject from the right click
menu to insure properly closed and written files before removing drive from a
computer
•
When updating with the firmware Update button, unplug all HDMI connections
from Quick6. Remove power from Quick
6
. Hold firmware update button and
apply power.,
Factory Default
issues:
Follow reset procedure exactly:
