DVDO Quick
6
19
A.04
CEC Enable:
If checked, Quick
6
will respond to CEC commands i.e. power
on/off. If unchecked, CEC commands will be ignored. *On
Enable ARC:
Enables Audio Return Channel from the TV to the main
HDMI output. It sends a request to the TV to begin sending audio.
Disable ARC:
Disables the ARC function and sends a request to the TV to
terminate the stream and exit ARC mode.
Load FW from USB:
Loads new firmware from an inserted USB flash
drive. Note: user needs to confirm this operation by pressing ENTER
again,. See Updating Firmware for more information.
Factory Settings:
Resets Quick
6
to factory default settings. Note: the user
needs to confirm this operation by pressing ENTER again. Power cycle
Quick
6
after 30 seconds.
EDID Mode:
Allows setting a fixed EDID.
HDMI 6 Power:
Allows non-MHL mobile devices to charge on port 6 and
aids with compatibility with older devices. When activated, the input will
always appear to be active even if the connected source is off. This results
in a blank InstaPrevue and PiP window and an always on amber input LED.
* Off
