Dutec I/O Plexer Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 64

Dutec I/O Plexer Скачать руководство пользователя страница 4

I/O P

LEXER

Nov. 23, 2004

-ii-

Copyright

Copyright 2004-duTec inc. All rights reserved. However, any part of
this document may be reproduced, provided that duTec inc. is cited as
the source. The contents of this manual and the specifications herein
may change without notice.

Trademarks

The duTec logo and I/O PLEXER are trademarks of duTec inc.
WINDOWS™ and WINDOWS 95 are trademarks of MicroSoft.

Notice to the User

The information contained in this manual is believed to be correct.
However duTec inc. assumes no responsibility for any of the circuits
described herein, conveys no license under any patent or other right
and makes no representations that the circuits are free from patent
infringement. duTec inc. makes no representation or warranty that such
applications will be suitable the use specified without further testing or
modification.

DuTec inc. general policy does not recommend the use of its products
in life support applications where failure or malfunction of a
component may directly threaten life or injury. It is a condition of sale
that the user of duTec inc. products in life support applications assumes
all risk of such use and indemnifies duTec inc. against all damage.

Warranty

duTec inc. warrants its products to be free of defects in materials and
workmanship for a period of two (2) years from the shipment date.
DuTec inc., at its option, will repair or replace all material found to be
defective. All repair or replacement must be performed by duTec inc.
personnel. Any parts determined by duTec inc. to be defective as a
result of abuse, misuse or attempts to repair will be repaired at the
expense of the customer. DuTec inc. will not be held liable for any
consequential, incidental, or special damages.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
2
3
4
5
6
...
»

Содержание I/O Plexer

































































Отзывы:

Нет отзывов