Dutch Pinball DP-069, Техническая поддержка

Страница: 59 / 146

Dutch Pinball – Technical Support TBL FAQ rev 0.51
Page 59 MPF Operations faq rel 0.70
Upper flipper doesn’t work
Of course, this can be a malfunction of the flipper itself but
1. The flipper only works if a ball is on the MPF
2. There are 3 Carmodes. One of them is Impound Car. In this Carmode once you have bashed
the Car the upper flipper will stop working till next time the ball enters the MPF. So, this is
not an error but a feature
Ball comes down Walter ramp after Jesus ramp was shot
If you shoot Jesusramp the ball will end on a VUK which brings the ball to the MPF. It should go than
to the mini flipper on the MPF. If it comes however down the Walter ramp most likely the force of
the VUK is to strong and you need to adjust it downwards (Testmenu
– Adjustment menu - Coil
Strengths - VUK)