Dutch Pinball DP-069, Техническая поддержка

Страница: 146 / 146

Dutch Pinball – Technical Support TBL FAQ rev 0.51
Page 146 MPF kit installation guide rel 1.0
In this mode, the motor will run continuously. If you suspect any intermittent problem, this
can be useful to diagnose it or to adjust a switch. Cardoor should go open and close
smoothly. If the cardoor stutters against the parking targets you will need to adjust the
parking targets, if it stutters when closed, you will have to adjust the switch there.
Step 11 – Wrap up
•
If everything is tested OK you can turn your TBL off
•
Place all screws in place whic h secure the MPF (don’t forget the one coming from the
backboard on the backsite)
•
Reinstall the roof
•
Reinstall the wireform and right ramp (when installing the right ramp put some thin plastic or
cloth under the rampflap to avoid it making scratches on the playfield)
•
Place playfield vertical again and install the upper flipper. Make sure its properly aligned and
has some free space to move in vertical direction. There is a spare flipperbushing included In
the kit in case it’s needed.
•
Place playfield horizontal again, install glass and lockbar.
You are now all set to turn on the game and enjoy again your TBL