4
Parts & Operations Manual
Micro-5
Technical Information
General description
This machine is a scrubber dryer for sweeping, washing and drying flat, horizontal, smooth or moderately rough, uniformly
structured and obstacle-free floors in civil and industrial premises. The scrubber dryer spreads a solution of water and detergent in
the correct concentration on the floor and then scrubs it to remove the dirt. By carefully choosing the detergent and brushes (or
abrasive disks) from the wide range of accessories available, the machine can be adapted to a wide range of combinations of types
of floor and dirt.
The machine incorporates a wet vacuuming system which dries the floor immediately after washing. The drying action is
produced by the suction motor, which generates a partial vacuum in the dirty water tank. Squeegees mounted beneath the tank
are designed to collect the film of dirty water with the machine moving in both forward and reverse directions.
Key
The main parts of the machine are as follows:
•
The water/detergent tank (fig. 1, ref. 1) contains and carries the mixture of clean water and cleaning product.
•
The dirty water tank (fig. 1, ref. 2) collects the dirty water picked up from the floor after washing;
•
Control panel (fig. 1, ref. 3).
•
Head assembly (fig. 1, ref. 4), the main element comprises the brush that spreads the detergent solution over the floor
and washes the surface, bringing about the removal of the dirt.
•
Front squeegee assembly (fig. 1, ref. 5), which wipes and dries the floor when the machine is pulled toward the operator.
•
Rear squeegee assembly (fig. 1, ref. 6), which wipes and dries the floor when the machine is pushed forward by the
operator.
•
Battery (fig. 1, ref. 7).
Accessories
•
Soft and hard brushes, abrasive pads.
•
Pad Holder.
•
Standard battery
•
Uprated battery
•
Battery charger
Содержание 19376
Страница 2: ......
Страница 39: ...Notes ...