Dustbane 19376, Руководство по эксплуатации

Страница: 17 / 40

17 Parts & Operations Manual Micro-5
Front squeegee:
• Detach the suction hose from the squeegee (fig. 39, ref. 1).
• Unscrew the knobs (fig.39, ref. 2).
• Separate the squeegee from the machine (fig. 40, ref. 1).
• Pull out the blade, so as to free the entire assembly (fig. 41).
• Remove the blade.
• Either refit the same blade with the wiping edges reversed, so that it can be used until
both edges are worn out, or replace with a new blade, clipping it to the slots in the body of
the squeegee;
• Refit the squeegee to the machine, following the instructions described previously.
Rear squeegee:
• Lower the squeegee control lever.
• Detach the suction hose from the squeegee (fig. 42, ref. 1).
• Unscrew the knobs (fig.42, ref. 2).
• Pull out the blade, so as to free the entire assembly (fig. 43, ref. 1).
• Remove the blade (fig. 44).
• Either refit the same blade with the wiping edges reversed, so that it can be used until
both edges are worn out, or replace with a new blade, clipping it to the slots in the body of
the squeegee;
• Refit the squeegee to the machine, following the instructions described previously.
Replacing the brush:
The brush presents a number of tufts, coloured red, with bristles shorter in length than the rest (fig.
45). When the tufts of black bristles wear down to the same length as the red bristles, the brush
must be replaced. For directions on replacement of the brush, refer to the sections “Releasing the
brush/pad driver” and “Fitting the brush/pad driver”.