Dust-Hog SUPRA-CONIC, Инструкция по установке и эксплуатации

Страница: 10 / 44

5
United Air Specialists, Inc.
Revised 9/02
Porta-Hog
®
Supra-Conic
®
Cartridge Dust Collector
4. INSTALLATION
4.1 INSPECTION NOTE
Upon receipt of your unit, check for any shipping
damage. A damaged carton indicates that the equipment
may have received rough handling during shipping that
may have caused internal damage. Notify your delivery
carrier and enter a claim if any damage is found.
4.2 OFF LOADING AND INSPECTION
Each Supra-Conic
®
unit is shipped completely assembled
on one skid. Another skid will contain the hopper/leg
assembly and other components. Other accessories
(afterfilters, assemblies, casters, storage drums, etc.)
may be on an additional, separate skid.
Hopper overall dimensional information can be found in
Figures 11, 12 and 13 in Section 7 of this manual.
Supra-Conic
®
dust collectors have high centers of
gravity due to the unique fan design. Extreme care
should be used when moving the collector to avoid
overturning the unit.
NOTE: Do not lay collector on its side or back as
damage to fan assembly may occur.
4.3 INSTALLATION PLANNING
A solid, level surface is required for installation of a
standard Supra-Conic
®
dust collector. A collector with
optional hopper assembly requires a level concrete
surface for installation. The concrete surface or pad is
3. SUPRA-CONIC ® SPECIFICATION TABLE
S u p r a - C o n i c ® M o d e l
SC600 w/dust drawer
SC600 w/5 gallon (19 liter) pail
hopper assembly
SC1700 w/dust drawer
SC1700 w/30 gallon (114 liter)
drum hopper assembly
SC1700 w/55 gallon (208 liter)
drum hopper assembly
SC3400 w/dust drawer
SC3400 w/30 gallon (114 liter)
drum hopper assembly
SC3400 w/55 gallon (208 liter)
drum hopper assembly
M o t o r / B l o w e r
H P ( k W )
1.5 (1.1)
3 (2.2)
7.5 (5.5)
Filter A r e a
F T 2 ( M 2 )
70 (6.5)
192 (17.8)
384 (35.7)
F i l t e r
Q u a n t i t y
1
1
2
Va l v e
Q u a n t i t y
1
1
2
U n i t
We i g h t
LBS (KG)
283 (128)
385 (175)
395 (179)
520 (236)
550 (249)
685 (311 )
838 (380)
859 (390)
Maximum Sound
Power Noise Level
dB+ –5dB @ 5 ft. (1.5M)
7 3
7 9
8 5
usually reinforced. Refer to Section 4.5.2 and Section
7.1 for additional information on optional hopper
assembly installation requirements.
The Supra-Conic ® dust collector is designed for indoor
operation and location only. The Supra-Conic ® is
designed to operate at a maximum indoor temperature
environment of 100°F (38°C).
The built-in air compressor is designed to operate in
a light-duty environment. Heavy or dirty environments
will cause the air compressor to malfunction and/or
fail prematurely. In heavy or dirty environments, it is
recommended the customer provide compressed air
to the dust collector manifold.
Locate the Supra-Conic ® dust collector as close as
possible to the dust source.
Certain items should be considered when locating the
unit, such as room to empty the dust storage container(s)
(dust drawer, drum or pail), filter removal requirements,
electrical connections and fan discharge direction. The
shortest duct length with a minimum number of elbows
will maximize the performance of the unit. Ease of
maintenance should also be considered when selecting
the location and orientation of the system.
Do not locate dust collector near dust source in cases
where dust is explosive or a fire hazard.
Supra-Conic
® dust collectors are not designed as
explosion proof and/or spark resistant units.
C A U T I O N
!
WA R N I N G
!
C A U T I O N