manualshive.com logo in svg

Durr Dental 2032-50, Инструкция по установке и эксплуатации

Поделиться
Скачать
Durr Dental 2032-50 Скачать руководство пользователя страница 27

Attach Scaler handpiece

❯

Attach the Scaler handpiece to the hose con-
nection.

Inserting/changing instruments

CAUTION
If an attempt is made to perform a
treatment with a damaged or worn
instrument, this can cause injury and
may result in an unsuccessful treat-
ment.

❯

Worn or bent instruments should be
replaced immediately and not reused!

The tool kit cover of the instrument is
used as a torque wrench for tightening
the union nut of the instrument chuck.

❯

Select a suitable instrument for the corre-
sponding treatment.

To prevent the instrument from being
overtightened, the torque wrench slips
when the required torque is reached. No
ratcheting sound can be heard.

❯

Always use the torque wrench to screw the
instrument on and off.
When screwing the instrument on, slowly turn
the torque wrench approx. a quarter turn
beyond the resistance point.

Usage

9000-615-32/02 2012V003

25

EN

Содержание 2032-50

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды