Duronic CG421, Руководство пользователя, Страница: 15 / 77

15
Problem
Possible
Cause
Suggested
Solutions
The grinder does
not work after
being switched
on
The grinder lid was not
properly in place so it did
not connect with the power
activating buttons on the
motor unit.
Check the grinder lid and ensure it is
properly in place.
The 3 touch sensors on the
top of the motor unit may be
obstructed by something.
Check and clean/clear the 3 sensors
if they are dirty or have anything
obstructing them.
The grinder stops
working during
operation
Check if the power cable/
plug is loose.
If the power cable is loose, push it
back into the socket and switch it on.
Check if the motor unit is
too hot.
If the motor unit has overheated the
grinder will need to rest and cool down
before you can continue using it.
If it does not work after cooling down,
please contact Duronic for further
advice.
The machine
starts to make a
bad smell
With new products that
contain a motor it is normal
for it to emit a smell upon
first use.
The smell should fade upon use of the
grinder. If the smell persists after a few
uses, contact Duronic for advice.
Abnormal
vibration or noise
Unstable positioning of the
grinder unit.
Reposition the grinder on a smooth
even surface.
The lid, grinding pot,
blade or base is loose or
damaged.
If any parts are damaged, do not use
the grinder. Contact Duronic directly
where you should be able purchase
the replacement part you need.
Troubleshooting Guide