DUROMAX XP18HPX Скачать руководство пользователя страница 9

Страница: 9 / 70

WARNING

This engine may emit highly flammable and explosive gasoline vapors, which

can cause severe burns or even death. A nearby open flame can lead to an explosion

even if not directly in contact with gasoline.

●

Do not operate near an open flame.

●

Do not smoke near the engine.

●

Always operate on a firm, level surface.

●

Always turn the engine off before refueling.

●

Allow engine to cool for at least 2 minutes before removing the fuel cap. Loosen cap
slowly to relieve pressure in the tank.

●

Do not overfill the gas tank. Gas may expand during operation. Do not fill to the top

of the tank.

●

Always check for spilled gas before operating.

●

Empty the gasoline tank before storing or transporting the engine.

●

Before transporting, turn the fuel valve to the off position and disconnect

the spark plug.

Содержание XP18HPX







































































Результаты поиска

Содержание XP18HPX

Отзывы:

Похожие инструкции для XP18HPX

Бренды по названию

Популярные бренды

DUROMAX XP18HPX, Руководство пользователя

Результаты поиска

Содержание XP18HPX

Отзывы:

Похожие инструкции для XP18HPX

Бренды по названию

Популярные бренды