manualshive.com logo in svg

DUROMAX XP18HPX, Руководство пользователя

"DUROMAX XP18HPX" - мощный бензиновый двигатель мощностью 18 л.с., идеально подходит для различных видов оборудования. Вы можете загрузить руководство пользователя бесплатно с manualshive.com. Подробная информация о настройках и обслуживании этого продукта позволит вам максимально эффективно использовать его возможности.

Поделиться
Скачать
background image

65

65

OWNER’S WARRANTY RESPONSIBILITIES:

As the small off-road engine owner, you are responsible for performance of the required 

maintenance listed in your owner’s manual. DuroMax Power Equipment recommends that you 

retain all receipts covering maintenance on your small off-road engine, but DuroMax Power 

Equipment cannot deny warranty coverage solely for the lack of receipts or your failure to ensure 
the performance of all scheduled maintenance.

As the small off-road engine owner, you should be aware that the DuroMax Power Equipment may
deny you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, 
or improper maintenance or unapproved modifications.
You are responsible for presenting your small off-road engine to a DuroMax Power Equipment

distribution center or service center as soon as the problem exists. The warranty repairs shall be
completed in a reasonable amount of time, not to exceed 30 days.
If you have any questions regarding your warranty coverage, contact us at 844-387-6629 or email
[email protected].

DEFECTS WARRANTY REQUIREMENTS:

The warranty period begins on the date the engine or equipment is delivered to an ultimate 
purchaser and extends for a period of Two Years.
GENERAL EMISSIONS WARRANTY COVERAGE:
DuroMax Power Equipment warrants to the ultimate purchaser and each subsequent owner that 
the engine or equipment is:
1. Designed, built, and equipped to conform with all applicable regulations adopted by the Air
Resources Board; and
2. Free from defects in materials and workmanship that causes the failure of a warranted part for a
period of two years.
The warranty on emissions-related parts will be interpreted as follows:
1. Any warranted part that is not scheduled for replacement as required maintenance in the
Owner’s Manual must be warranted for the warranty period stated above. If any such part fails 
during the period of warranty coverage, it must be repaired or replaced by DuroMax Power 

Equipment according to Subsection (4) below. Any such part repaired or replaced under the 

warranty must be warranted for a time not less than the remaining warranty period.
2. Any warranted part that is scheduled only for regular inspection in the Owner’s Manual must be
warranted for the warranty period stated above. A statement in such written instructions to the 

effect of “repair or replace as necessary” shall advise owners of the warranty coverage for emission 

related parts. Replacement within the warranty period is covered by the warranty and will not 
reduce the period of warranty coverage. Any such part repaired or replaced under warranty must 
be warranted for a time not less than the remaining warranty period.
3. Any warranted part that is scheduled for replacement as required maintenance in the Owner’s

Manual must be warranted for the period prior to the first scheduled replacement point for that 
part. If the part fails prior to the first scheduled replacement, the part must be repaired or replaced 
by the engine manufacturer according to Subsection (4) below. Any such part repaired or replaced

Содержание XP18HPX







































































Отзывы:

Нет отзывов

Похожие инструкции для XP18HPX

O.S. engine MAX-46AX Instruction Manual preview
MAX-46AX
Бренд: O.S. engine Страницы: 4
Zenoah G231PUM Owner'S Service Manual preview
G231PUM
Бренд: Zenoah Страницы: 20
Admiral 60cc Instruction Manual preview
60cc
Бренд: Admiral Страницы: 9
hager HXE04.H User Instructions preview
HXE04.H
Бренд: hager Страницы: 4
Nanni 4.390 TDI User Manual preview
4.390 TDI
Бренд: Nanni Страницы: 24
Briggs & Stratton 90000 series (Hungarian) Operating & Maintenance Manual preview
90000 series
Бренд: Briggs & Stratton Страницы: 10
Zundapp 100 cc Service Manual preview
100 cc
Бренд: Zundapp Страницы: 52
ZIEHL-ABEGG ZA top SM210.60 Original Operating Instructions preview
ZA top SM210.60
Бренд: ZIEHL-ABEGG Страницы: 96
JetCat P100-RX Manual preview
P100-RX
Бренд: JetCat Страницы: 54
Vetus EAIR040 User Manual preview
EAIR040
Бренд: Vetus Страницы: 28
Volkswagen TDI 350-8 Operating Manual preview
TDI 350-8
Бренд: Volkswagen Страницы: 64
Siemens Simodrive 611 Installation Manual preview
Simodrive 611
Бренд: Siemens Страницы: 4
Siemens SIMOTICS A-1FV5 Operating Instructions Manual preview
SIMOTICS A-1FV5
Бренд: Siemens Страницы: 66
Siemens SIMOGEAR 2332 Original Mounting And Operating Instructions preview
SIMOGEAR 2332
Бренд: Siemens Страницы: 56
Siemens SIMODRIVE POSMO A Function Manual preview
SIMODRIVE POSMO A
Бренд: Siemens Страницы: 58
Siemens SIMOTICS GP Operating Instructions Manual preview
SIMOTICS GP
Бренд: Siemens Страницы: 100
Siemens Simotics HV C 1NA14544WA600AG0-Z Operating Instructions And Installation Instructions preview
Simotics HV C 1NA14544WA600AG0-Z
Бренд: Siemens Страницы: 112
Siemens SIMOTICS DP 1PC13 Operating Instructions Manual preview
SIMOTICS DP 1PC13
Бренд: Siemens Страницы: 100

Бренды по названию

Популярные бренды

Загрузить еще бренды