DUROMAX DuroStar DS13000DX Скачать руководство пользователя страница 10

Страница: 10 / 84

In addition to the above safety notices, please familiarize

yourself with the safety and hazard markings on the

generator.

GENERAL SAFETY PROCEDURES

DANGER

DO NOT OVERFILL

THE GAS TANK

OVERFILLING CAN RESULT

IN A FIRE, EXPLOSION,

OR DEATH.

1.5”

(12) 97mm x 66mm

REAR SHROUD

FRONT SHROUD

(5) BATTERY COVER DECAL - 270mm x 119mm

DS13000DX DECAL SHEET

REVISED 07-14-2021

60mm x 17mm

54mm x 24mm

CHOKE LEVER

CLOSED

OPEN

PINK LINE IS TRIM LINE

DO NOT PRINT

BATTERY COVER - REMOVE BOLTS TO SERVICE GENERATOR BATTERY

GASOLINE

PROPANE

PEAK WATTS

13000

RUNNING WATTS

10500

PEAK WATTS

12350

RUNNING WATTS

9975

1. All personnel must wear ANSI approved safety goggles when setting up this generator, working with tools and equipment.
2. Before using this generator, you must read the user manual. Read and adhere to all safety warnings to reduce the risk of personal injury and

damage to equipment.
3. All electrical work, including earth-ground connections, should be completed by a licensed electrician.
4. Generator fuel and fumes are flammable and potentially explosive. Use proper fuel storage and handling procedures while

using this generator.
5. Remove any flammable materials next to, around, or on this equipment.
6. Do not smoke, allow sparks, flames, or other sources of ignition around the engine, fuel tank, or battery. Fuel vapors are

explosive. While charging, batteries emit hydrogen gas which is highly explosive. Do not refill the generator fuel tank while the engine is running.
7. Keep access panels closed and secure when access is not required.
8. Read and adhere to all electrical warnings and precautions discussed in the user manual before setting up and running the generator.
9. Do not attempt to start the generator engine before it has been checked for sufficient fuel and oil. See user manual for

recommended fuel and oil type and capacity.
10. All maintenance must be performed by a qualified mechanic or licensed electrician.

DANGER

CAUTION

THIS GENERATOR IS NOT

INTENDED TO POWER

SENSITIVE ELECTRONIC

EQUIPMENT WITHOUT THE

ADDITION OF AN APPROPRIATE

LINE CONDITIONER

(SOLD SEPARATELY)

HIGH VOLTAGE ELECTRICAL

DANGER

Made in China

DANGER

Operating, servicing and maintaining a generator or off-road

vehicle can expose you to chemicals including engine exhaust,

carbon monoxide, phthalates, and lead, which are known to the

State of California to cause cancer and birth defects or other

reproductive harm. To minimize exposure, avoid breathing

exhaust, do not idle the engine except as necessary, service your

generator in a well-ventilated area and wear gloves or wash your

hands frequently when servicing your vehicle. For more

information go to www.P65Warnings.ca.gov/passenger-vehicle.

DANGER

The operation of this equipment may create sparks that can start fires

around dry vegetation. Contact local fire agencies for laws or regulations

relating to fire prevention requirements.

RISK OF

ELECTRIC

SHOCK

-Always ground properly before use.

-Never use uncovered in rainy or wet conditions.

-Never touch bare wires or outlets.

-Do not connect directly to any building electrical system.

MOVE TO FRESH AIR

AND GET MEDICAL

HELP IF SICK, DIZZY, OR

WEAK.

ALERT

AUTOMATIC SHUTOFF

If your generator has shut off/shutoff and the CO Alert RED

indicator light appears on the front panel, the unit has detected

an excessive amount of carbon monoxide in the air. Follow the

following directions BEFORE attempting to restart your generator.
Please consult your owner’s manual for additional information.

ONLY

OPERATE GENERATOR IN AN OPEN, OUTDOOR AREA AT LEAST 5 FEET AWAY FROM

ANY FLAMMABLE MATERIAL. POINT EXHAUST AWAY FROM STRUCTURES. DON’T RUN

GENERATORS IN ENCLOSED AREAS (I.E. NOT IN HOUSE OR GARAGE).

DANGER

DO NOT REMOVE THIS WARNING LABEL

READ

READ USER MANUAL

BEFORE OPERATING THIS

PRODUCT

DANGER

HOT EXHAUST

KEEP SAFE DISTANCE

DON’T

TOUCH

BURN RISK

CARBON MONOXIDE

SAFE DISTANCE

DON’T

TOUCH

CAUTION HIGH TEMPERATURE

REMOVE

REMOVE THIS SHIPPING BRACE BEFORE

FILLING ENGINE WITH OIL AND FUEL

32mm x 32mm

DANGER

DO NOT OVERFILL

THE GAS TANK

OVERFILLING CAN RESULT

IN A FIRE, EXPLOSION,

OR DEATH.

1.5”

(12) 65mm x 30mm

Clean air filter after every 50 hours of use

Never clean with a brush.

(every 10 hours in unusually dusty conditions)
Wash filter element with household detergents.

Wipe out dust from air filter housing before

replacing filter element.

MAINTAIN AIR FILTER

8.3

GALLON CAPACITY

NIMUM OCTAN

RE F

OR E

XTENDED TIME W

ITH

SPARK PLUG

CONSULT MANUAL

BEFORE REMOVING

(10) 60mm x 17mm

(09) 63mm x 24mm

REMOVE THE

RED

COLORED SHIPPING

BRACE BEFORE RUNNING GENERATOR

OR DAMAGE MAY OCCUR.

REMOVE

(14) 97mm x 33mm

NOTE: Pink line is die cut line.

EPA+CARB

A P P R O V E D

DESIGNED WITH A REDUCED

EMISSIONS ENGINE

DS13000

500cc

OHV

Содержание DuroStar DS13000DX





















































































Результаты поиска

Содержание DuroStar DS13000DX

Отзывы:

Похожие инструкции для DuroStar DS13000DX

Бренды по названию

Популярные бренды

DUROMAX DuroStar DS13000DX, Руководство пользователя

Результаты поиска

Содержание DuroStar DS13000DX

Отзывы:

Похожие инструкции для DuroStar DS13000DX

Бренды по названию

Популярные бренды