DUROMAX DuroStar DS13000DX Скачать руководство пользователя страница 18

Страница: 18 / 84

PACKAGE CONTENTS

Your generator comes with the items listed below. Please check to see that all of the following
items are included with your generator.

●

Note: Actual tools may differ in appearance or design from the image shown.

Propane Regulator w/

Hose

Used to provide a regulated

propane supply to the propane

inlet.

Your generator comes with the items listed below. Please check to see that all of the following
items are included with your generator.

Double-Sided

Screw Driver

Oil Funnel w/ Hose

Spanner

Spark Plug Wrench

Plug Ends

Phillips and slot blade

screwdriver used for generator

maintenance.

Used to add oil to the

generator without messy spills.

Assorted wrenches used in

generator maintenance and

assembly. 10mm/12mm,

13mm/15mm, and

17mm/19mm.

Used in spark plug

maintenance, inspection, and

installation.

Plug heads for the receptacles

found on the generator are

included to make or rewire

your own cords.

Содержание DuroStar DS13000DX





















































































Результаты поиска

Содержание DuroStar DS13000DX

Отзывы:

Похожие инструкции для DuroStar DS13000DX

Бренды по названию

Популярные бренды

DUROMAX DuroStar DS13000DX, Руководство пользователя

Результаты поиска

Содержание DuroStar DS13000DX

Отзывы:

Похожие инструкции для DuroStar DS13000DX

Бренды по названию

Популярные бренды